Chonky CR1 TPU Foot
Description
These are some chonky 3D printed feet (one for each corner) for the CR1 to raise it off the reinforcement bar and reduce vibrations. They elevate the edges of the casing 18mm so there's plenty of clearance (~5 mm) under the reinforcement bar (in alpha machines, anyway) for various shaving collection strategies. The machine just rests on them, but you can glue them in place if you want.
Material: TPU
Layer Height: 0.25mm
Wall/Shell Count: 3
Infill Type: Gyroid
Infill Density: 20%
Supports: None
Print time: ~7 hours for four @ 35mm/s
Material
Tooling
Workholding
Model Origin
The author marked this model as their own original creation.
License ©
This work is licensed under a
Sharing Without Attribution
Remix Culture Allowed
Commercial Use
Free Cultural Works
Meets Open Definition